Skip to main content

 

Filter By:

Tools & Tuning

$249.95
Our new patent-pending IR Waxer is a game-changer for at home waxing. It's the tuning tool you never knew you could live without! EFFECTIVE: IR waxers help the bases to absorb wax. You can actually watch the wax disappear into the bases as you are waxing SUSTAINABLE: These devices use very little wax. Plus there is no wax being scraped off the ski and onto your floor EASY TO USE: IR waxers eliminate the need for scraping. Simply brush out the bases and you're ready to rip! SAVES MONEY: They make your bar of wax last much longer ALL THE PERFORMANCE. NO SCRAPING REQUIRED. Get the performance of a full hot wax, without any of the scraping!
$129.95
HappyNorwegian’s Mr. Grippy makes ski tuning easy and works great for all types of skis + snowboards! High friction rubber above and below ensures that the skis are stable as you scrape, brush, clean, grind steel edges and much more. Sold in pairs (2 pieces). Materials: Composite and high friction rubber Cleaning: Wipe off with a damp cloth Official Tuning Stand for Norwegian Ski Team Add on optional tray for extra storage space! Note: The center slot used for tuning side edges will fit about 95% of skis. However, if your skis are fully rockered or abnormally thick, you might have a tough time fitting them in the slots.
$109.95
Ready to step up your game? This wax kit has everything you need to take it to the next level! WAX IRON: Thick base plate to maintain consistent temperature and a dimpled surface for even wax distribution and smooth float during application. PERFORMANCE WAX | COOL + WARM: Plant-based + biodegradable. Two temperature-specific waxes to ensure that you have a fast, smooth glide in any snow condition. BRASS WAX BRUSH: Perhaps the most underrated tool in any comprehensive wax kit. This ergonomic wax brush will help remove old wax and to expose the base structure after a coat of fresh wax. WAX SCRAPER: Sharp and sturdy, makes the wax scraping process quick + easy. TRAVEL CASE: Keeps all your tuning tools in one place for travel and storage.
$54.95
This is a great all-around iron. Sturdy enough to be your "go-to" for the home wax bench and light enough to travel with on your next ski trip. THICK BASE PLATE: Maintains a consistent temperature to make waxing easier + more efficient DIMPLED SURFACE: Provides even wax distribution and smooth float during application SUPER DURABLE: This is a backshop favorite and is used by professional Ski Technicians around the world EASILY ADJUSTABLE: Temperature dial makes it easy to set an accurate temperature for the iron TEMP RANGE: 60C to 180C - can be used for all types of wax
$30.00
All-round brush. It will polish the liquid/pastewaxes and will also work on the harder melt on waxes. Has both bronze and nylon brittles for all waxes. Blister pack w/alarm label - Bronze and nylon brush - Swix waxing brush - Solid hand brush - High quality - Must have for ski waxers
$22.99
The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality. - For training and competitions - Fluorine free and 100% biodegradable - Thoroughly tested on several types of conditions
$20.00
Practical all-round brush with pocket-sized nylon bristles. Top quality. - Nylon brush - For polishing glide wax - For those who want a better skiing experience - Ergonomically designed
$19.95
Brushing is a crucial step for any well-prepared ski or snowboard. The process will help to expose the structure of the base which will dramatically increase speed and reduce drag. Nylon Brush works great right after scraping and is a good first step for polishing Helps to expose the base structure and remove any extra wax that was not scraped away Ergonomic wooden handles makes for enjoyable and effortless brushing
$18.99
PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply
$18.99
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
$18.99
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).
$16.99
Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.
$16.99
Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.
$15.95
mountainFLOW’s Quick Wax is easy to apply and works great in all conditions. Apply this wax for a smooth and consistent glide. It helps skis + snowboards to work more efficiently (they are designed to work with wax) and it will extend the life of your equipment. There is an applicator pad inside the wax tin, for quick and easy use. PLANT-BASED: mountainFLOW wax is made from 100% plant-based ingredients. 0% PETROLEUM: Most wax is made from petroleum and anything that is applied to skis/snowboard enters directly into the environment. WICKED FAST: Performs as well as a conventional (petroleum-based) ski wax - we’ve run controlled performance tests to prove it! BIODEGRADABLE + NON-TOXIC: mountainFLOW is safe for both the user and the environment EASY TO APPLY: Simply rub into base and buff with cloth. Comes with applicator pad.
$15.95
mountainFLOW’s rub-on skin wax is super easy to use and helps prevent icing on climbing skins (which is the worst!) HIGHLY EFFECTIVE: Prevents icing on climbing skins and provides extra glide PLANT-BASED + BIODEGRADABLE: Completely non-toxic and environmentally safe. 0% PETROLEUM: Most other skin wax is made from petroleum and whatever you put on your skins goes directly into the environment. SUPER EASY TO USE: Put skins on skis and then just rub the wax on the plush side of the skins. It's best to do this before you start your tour but you can also apply it on the skin track. SIZE: 56g
$15.95
mountainFLOW’s Skin Wax improves glide while maintaining a solid kick. By keeping the skins dry, snow buildup is reduced and skins stay light and fast. ECO-FRIENDLY: This skin wax is water-based and non-toxic. HIGH PERFORMANCE: Improves glide, reduces snow/ice buildup, and maintains kick; Unlike a rub-on wax, which can clump fibers, this spray keeps skin fibers separated and "grippy" LIGHT + FAST: This wax will help keep your skins dry, which will keep them lighter and faster. EASY TO APPLY: Simply spray onto skins, let dry, hit the skin track! SNOW SLIDERS: Works great for backcountry skis, splitboards, and nordic skis. SUSTAINABLE PACKAGING: The bottle is made with 100% Post Consumer Recycled plastic
$12.99
Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.
$12.00
Practical combi pack with Fibertex. Fibertex Combi Pack with Fine (T266)/ Medium (T264) and Coarse (T266N) for ski base care.
$8.99
It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.
$8.99
A new scraper is super nice. It makes the waxing process much easier and will lead to a more efficient and effective waxing job. Strong and wicked sharp Notched corner for edges 4 mm thick
Page 1 of 1