Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Bindings

Marker Duke PT 12
$599.99 - $700.00
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties from DIN 4-12. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another advantage, the Hollow Linkage heelpiece gives the skier the security and power transmission as our Squire freeride binding on the way down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. HOLLOW LINKAGE HEEL - The Hollow Linkage Heel was designed to optimize retention for all common types of alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The very robust construction is best suited for the most strenuous requirements.
Marker Kingpin 13
$699.99
The innovative Kingpin redefines the performance standard for Alpine touring bindings. The Kingpin’s unique toe and heel pieces are the culmination of years of R&D testing. Ease of use and best of all, great power transmission while on the descent mean that you can have a perfect day in the backcountry on the Kingpin. The latest version now includes a two spring toe based on the Alpinist technology. This safes 80g per toe without losing performance! The Kingpin offers tremendous walking and step-in comfort, wide drill pattern and XXL Power Transmitter for impressive power transfer. Including climbing aids from 0° to 13°.
Dynafit ST Rotation 14 Bindings
$649.99
The ST Rotation 14 binding was developed for descent-oriented ski tourers who seek strong downhill performance, safety and comfort. The binding is impressive as a nearly indestructible partner with durable construction for your perfect line. The patented DYNAFIT pivoting toe piece evens out impacts that can effect ski and binding on a powerful dynamic downhill. The binding release function is thus more reliable and effectively counters unwanted early release. A forward pressure of 10 mm ensures that the release value remains constant even when skis experience deflection. With its perfect bayonet positive lock at the heel unit, an extremely high power transfer from binding to ski is achieved for increased responsiveness and downhill performance. Meaning you can tap into everything you have even on challenging terrain. The Step-In Side Towers make entry into the toe piece more than 30% easier. Meaning fast as lightening you are fully and easily ready to get going. At the same time, it increases lateral stability on the descent. The “Hub Centering” system in all bindings with a pivoting toe piece makes it child’s play for users to click into the boot’s neutral position and thus makes it easy to adjust your position for climbing. The brake locks out in walk mode automatically for best user-friendly handling. Thanks to three different walk modes, you can climb with maximum comfort. The Rotation 14 binding also offers 45 mm of flex in its length adjustment, enabling it to fit various sole lengths. The release values can be adjusted from DIN 7 to 14. As with all DYNAFIT bindings, the ST Rotation 14 has been developed and manufactured in Germany and offers DYNAFIT’s Lifetime Guarantee. ST Rotation 14 Binding – Lay first tracks.
Atomic Shift 13 MNC
$599.99
The Atomic Shift 13 MNC is a game-changer: the world's first binding with full touring and freeride capability in one. It's a genuine tech binding for hiking complete with pins. Then flick the hike/ride switch to ski mode and it turns into a genuine freeride binding for the way down, compatible with all normed boots on the market – alpine and touring. So, for the first time, you don't have to compromise when you're touring or skiing – either by hiking with a heavy solution like frames or skiing downhill with pins. You get the best for both. And even better, you can also use it for your alpine skiing days with your normal alpine boot. Finally, one binding for everything! BINDING ADJUSTMENT VALUE 6 - 13 TECH FEATURES - Hike and Ride Switch - Low Profile Chassis - Crampon Compatible - Oversized Platform - Toe Height Adjustment - Automatic Wing Adaptation - Easy Step-in - Locking Brakes - Carbon-infused PA material - Crampon Shift 100/120mm
Dynafit ST Rotation 10 Bindings
$599.99
The Dynafit ST Rotation 10 is a killer alpine touring binding that features a rotating toe piece for an excellent downhill feel. As you hit less than perfect patches of snow, the toe piece rotates slightly to provide an elastic feel that reduces feedback to skier. It also features a more consistent release. The 4-10 DIN provides a nice range for most skiers. Dynafit reliability meets excellent downhill performance with the ST Roation 10. Specifications Adjustability: 22.5 - 22.5 mm +/- Weight: 599 g DIN: 4-10 Lock Type: Manual Gender: Unisex Material: Chromoly, Forged Aluminium, High Tech Syntetic, Stainless steel
Dynafit ST Rotation 10 Bindings
$599.99
The ST Rotation 10 is impressive as a nearly indestructible binding with strong downhill performance, the highest comfort, and TÜV-certified safety. The patented DYNAFIT pivoting toe piece evens out impacts that can effect ski and binding on a powerful dynamic downhill. The binding release function is thus more reliable and effectively counters unwanted early release. A forward pressure of 10 mm ensures that the release value remains constant even when skis experience deflection. With its perfect bayonet positive lock at the heel unit, an extremely high power transfer from binding to ski is achieved for increased responsiveness and downhill performance. The Step-In Side Towers make entry into the toe piece more than 30% easier. Meaning fast as lightening you are fully and easily ready to get going. At the same time, it increases lateral stability on the descent. The “Hub Centering” system in all bindings with a pivoting toe piece makes it child’s play for users to click into the boot’s neutral position and thus makes it easy to adjust your position for climbing. The brake locks out in walk mode automatically for best user-friendly handling. Thanks to three different walk modes, you can climb with maximum comfort. The binding also offers 45 mm of flex in its length adjustment, enabling it to fit various sole lengths. The release values can be adjusted from DIN 4 to 10. As with all DYNAFIT bindings, the ST Rotation 10 has been developed and manufactured in Germany and offers DYNAFIT’s Lifetime Guarantee. ST Rotation 10 – Strong on the descent.
Marker Kingpin 10
$599.99
The innovative Kingpin redefines the performance standard for Alpine touring bindings. The Kingpin’s unique toe and heel pieces are the culmination of years of R&D testing. Ease of use and best of all, great power transmission while on the descent mean that you can have a perfect day in the backcountry on the Kingpin. The latest version now includes a 2 spring toe based on the Alpinist technology. This saves 80 g per toe without losing performance! The Kingpin offers tremendous walking and step-in comfort, wide drill pattern and XXL Power Transmitter for impressive power transfer. Including climbing aids from 0° to 13°.
Atomic Shift 10 MNC
$549.99
The Atomic Shift 10 MNC is the same binding as its bigger brother – with slightly lower DIN options. It's still the world's first binding with full touring and freeride capability in one. It's a genuine tech binding for hiking complete with pins. Flick the hike/ride switch to ski mode and it turns into a genuine freeride binding for the way down, compatible with all normed boots on the market – alpine and touring. No need to compromise when you're touring or skiing the resort– either by hiking with a heavy solution like frames or skiing downhill with pins. You get the best for both. And even better, you can also use it for your alpine skiing days with your normal alpine boot. Finally, one binding for everything! BINDING ADJUSTMENT VALUE 4 - 10 TECH FEATURES - Hike and Ride Switch - Low Profile Chassis - Crampon Compatible - Oversized Platform - Toe Height Adjustment - Automatic Wing Adaptation - Easy Step-in - Locking Brakes - Carbon-infused PA material - Crampon Shift 100/120mm
Marker Marker Alpinist 12 (w/o Brake)
$549.99
Super-light, ascent-oriented touring pin binding with ISI toe piece and great step-in comfort. Built for high alpine challenges. The ultra-light Alpinist pin binding (270 g not including brake) offers everything experienced touring skiers need. Its construction allows active length compensation without affecting the ski’s flex. A very stiff, ISI front makes the binding easier to step into, as a wide footprint with integrated stop automatically positions and aligns your boot. Kinematically optimized pin levers then allow the pins to snap shut with just a gentle push. The heel features 0°, 5° and 9° climbing aids and can be switched quickly and easily from ascent to descent mode. A 38 mm wide hole pattern transfers power brilliantly to the edges, which means control and great steering.
Dynafit Radical
$499.99
A true all-rounder: light, and put to the test over many years. Now, even more rugged with an aluminum reinforced heel unit. The perfect companion for all tours, from your local mountain to an alpine ski tour.
Marker Baron EPF 13
$499.99
The Baron earned its royal stripes long ago as a favorite amongst big mountain, backcountry enthusiasts. Extended Power Frame (EPF), with its extra-wide connection to the ski, gives it the structure needed to power today's wider skis through any snow conditions, whether inside or outside the resort. Frame binding technology allows skiers the versatility to go touring in boots without tech inserts. ANTI ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. HOLLOW TECH - Our fiber-reinforced frame base plate provides impressive riding stability and is yet very light due to the gas injected hollow construction. EPF - EXTENDED POWER FRAME - The power booster. The power frame delivers breath-taking performance and amazing power transfer in every condition. Recommended for skis over 88 mm. CLIMBING AIDS FRAME TOUR - The climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. - Small: 264 - 327mm - Large: 304 - 367mm
Marker Marker Alpinist 10 (w/o Brake)
$499.99
Super-light, ascent-oriented touring pin binding with ISI toe piece and great step-in comfort. Built for high alpine challenges. The ultra-light Alpinist pin binding (270 g not including brake) offers everything experienced touring skiers need. Its construction allows active length compensation without affecting the ski’s flex. A very stiff, ISI front makes the binding easier to step into, as a wide footprint with integrated stop automatically positions and aligns your boot. Kinematically optimized pin levers then allow the pins to snap shut with just a gentle push. The heel features 0°, 5° and 9° climbing aids and can be switched quickly and easily from ascent to descent mode. A 38 mm wide hole pattern transfers power brilliantly to the edges, which means control and great steering.
Marker F12 Tour EPF
$479.99
The ideal freeride binding with ultra-modern toe and heel pieces that will satisfy skiers who sometimes like to tour. As easy as ever to put on, with perfect power transmission thanks to a wide hole pattern. Compatible with alpine and touring boots. The F12 Tour EPF is the ideal binding for skiers who ski mainly off-piste and sometimes tour too. As well as all the familiar touring features, it boasts an extra-wide EPF frame that delivers excellent power transmission, making it easier to control turns in any kind of snow and taming even the widest touring ski. An ultra-modern hollow linkage heel with wider boot insert reduces the step-in force by around 35%. Snow and ice can be scraped effortlessly off the sole at the Triple Pivot Light toe piece with anti-ice bar. The F12 Tour EPF is compatible with all types of boot – including, of course, ones with GripWalk soles.
TwentyTwo Designs Axl Telemark Binding
$449.99
The TwentyTwo Designs Axl is a classic 75mm telemark binding that balances stellar power transfer with excellent touring abilities. This hardcore binding is built out of stainless steel and uses a burly 6-bolt mountain pattern to withstand some serious torque. The Axl tours beautifully thanks to the dialed pivot point and easy-to-use climbing bars. The Axl is ready to get after it in the backcountry. Specifications -The first free-pivot binding with three cable guide positions. -Super durable: 2000 lb test cable attachments won't break, toepiece forces transmitted steel-to-steel. -Over 2" of spring travel for smooth action and durability. -The spring-loaded HammerHeel is the easiest to use climber available; Flip it up or down with your ski pole. Climbing bails available in 3 sizes, standard bail included. -Cables routed underfoot for maximum control; plastic boots flex at the bellows instead of tip-toeing. -Ultra-secure mounting pattern. -Riser height: 1.1" or 28mm atrear, with a2 degree ramp. -Pivot location: directly under pin-line. -Weight: 3.9 lbs per large pair, 3.8 lbs for small. -Size Small for Mondo 25.5 and under, Large for 26 and up.
Marker F10 Tour
$399.99
Top entry-level touring binding with the latest toe and heel pieces and great ease of use. Like an alpine binding to step into, so does not require any getting used to. The F10 Tour is compatible with all types of boot – including ones with GripWalk soles. The perfect choice for touring skiers who are equally concerned about weight, handling and reliability, and for whom descent is just as important as ascent. The climbing aid can be positioned at 0°, 7° and 13° and makes it comfortable to walk on any slope. An innovative hollow linkage heel with wider boot insert reduces the step-in force by around 35%. Snow and ice can be scraped effortlessly off the sole at the Triple Pivot Light toe piece with anti-ice bar. The F10 Tour works with alpine and touring ski boots, including ones with GripWalk soles.
TwentyTwo Designs Vice Telemark Binding
$319.99
The TwentyTwo Designs Vice is a rock-solid and durable 75mm telemark binding. This binding is built for reosrt skiing and features 2-inches of smooth spring travel. The cables are built to last and have been tested at 2000 lbs. The Vice evolved from the classic HammerHead binding. This tele binding is 100% shready. Specifications -Super durable: 2000 lb test cable attachments won't break, one-piece stainless steel toepiece. -Over 2" of spring travel for smooth action and durability. -Cables routed underfoot for maximum control; plastic boots flex at the bellows instead of tip-toeing. -Ultra-secure mounting pattern. -Riser height: 1.0" or 25mm at rear, with a 2 degree ramp. -Weight: 3.15 lbs per large pair, 3.0 lbs for small. -Size Small for Mondo 25.5 and under, Large for 26 and up.
Marker Griffon 13 ID Bindings
$269.95 - $289.99
The Marker Griffon 13 binding is everything you need and nothing you don't. This alpine binding features a DIN range that will work for the overwhelming majority of skiers and offers reliable performance. For 2021, the Griffon features a tweaked heel piece allowing for easier an even easier step-in process. The Sole ID toe piece allows you to adjust the toe piece height so you can use alpine or alpine touring boots. When in doubt, mount up the Marker Griffons to your favorite pair of skis and shred your heart out. Specifications -DIN Range: 4-13 -Sole ID - run alpine or AT boots -Inter Pivot heel -Triple Pivot toe piece -Available in 90mm, 100mm, 110mm or 120mm brakes
Atomic Strive 14 GW
$249.95
Whether it's all-mountain, freeride or freestyle, the Atomic Strive 14 GW binding allows you to ski exactly the way you want, wherever you want. The low center of gravity LDN Toe places the binding closer to the ski for better next-to-snow feel, more direct response and quicker reaction throughout the turn. The toe adapts automatically to your alpine normed boot height and width and ensures constant release values and a slightly ramped chassis positions the skier in a more neutral stance. Robust and extremely lightweight, Strive 14 GW shaves weight without compromising durability by using just enough metal where it's needed most. The result is an all-mountain binding with a lower swing weight for easier maneuverability and strong, proficient skiing all day long.
Marker Squire 11
$229.99
Progressive, very light, and sturdy rookie freeride/freestyle binding that is GripWalk-ready and equipped with state-of-the-art components. The completely redesigned Squire 11 has progressive looks and is specially designed for lighter weight but fully motivated freeride and freestyle rookies. An extensively improved, lightweight Triple Pivot Light toe piece features a distinctive Ice Off Rail to keep the sole free of snow and ice. A state-of-the-art Hollow Linkage heel with its wider boot holder reduces the step-in force by approximately 35%, even with GripWalk soles. All in all, the Squire 11 is very compact and, despite its GripWalk compatibility, sits only 24mm high, which allows a very direct feel and ski control. - Category: Freeride - Brake width: 90, 100, 110mm - Din/ISO Range: 3.0 - 11.0 - Boot type:Adult, standard Alpine; GripWalk Adult - Recom. Skier's Weight: 30 - 110kg - Stand height w/o ski: 24mm - Toe System: Triple Pivot Light 2 - Step-in Heel: Hollow Linkage 2 - Heel adjustment range: 20mm - Weight: 820g - AFD Gliding Plate: Stainless Steel
Marker 7.0
$129.99
Marker's Junior bindings offer high-level features like the 4-linkage toe and compact heel to the very youngest of skiers. In addition to top-level retention/release technology, Marker junior bindings also provide seamless compatibility for use with Dalbello's ski boot models featuring GripWalk, to allow young skiers a better experience and more comfort while walking around the resort. COMPACT HEEL - A statement of efficiency - with the usual perfect MARKER release properties and the perfect mix of great design, lightness, and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to the release properties and is an excellent value. BIOTECH - During a backward twisting fall both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognizes this unfavorable force combination and reliably reduces the release force.
Marker 4.5
$99.99
Marker's new 4.5 Junior bindings offer high-level features like the 4-linkage Jr toe and Compact Jr 2 heel to the very youngest of skiers, allowing them to easily step in and out of the binding on their own. Apart from that the binding provides great riding safety and always enough pressure on the edge. AFD STAINLESS STEEL - All MARKER bindings are equipped with a movable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children's bindings or on ski tours. COMPACT HEEL - A statement of efficiency - with the usual perfect MARKER release properties and the perfect mix of great design, lightness and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to the release properties and is an excellent value. BIOTECH - During a backward twisting fall both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognizes this unfavorable force combination and reliably reduces the release force.
Marker Brake Marker Alpinist
$60.00
The optionally available brake comes in three different sizes for various ski widths (90 / 105 / 115 mm). It automatically locks in walking mode with the very first step and reactivates when switching back into riding mode. Their pronounced retraction brings the arms of the brake very close to the ski.
Page 1 of 1