29-Inch

Reserve DH 29 wheels are optimized for downhill racing, offer a 31mm internal width, and are available with Syndicate-spec red Chris King hubs. - Built with standard high-quality components including J-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - 20 x 110mm DH Boost hub - Backed by Santa Cruz lifetime warranty

Control and stability for enduro riding. Details - Tuned Front and Rear Carbon Wheel System for enduro riding and racing. - Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads encountered by each wheel during mountain bike riding. - Compliant-tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increases volume and contact patch, and rounds tire profile to enhance turning. - Stiff-tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.

Control and stability for enduro riding. - Mountain bike's first tuned carbon wheel system for enduro riding and racing. - Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.

Santa Cruz Reserve wheels are built on the highest quality carbon rims. Confidence in the design and strength of the Reserve wheels is backed up by a lifetime warranty. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from Santa Cruz's experience of knowing what riders need at every level—from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Reserve 37 wheels offer the widest range of choices. The 37s are optimized for tires from 2.5 to 2.8 inches wide, and will still support a 3.0 nicely. Plus-curious, but not willing to commit to an ultra-wide rim that’ll square off the swathe of 2.6 tires popping out of molds around the world? The new Reserve 37s width (37mm internal) is optimized for tires from 2.5 to 2.8 inches wide, and will still support a 3.0 nicely. The Reserve 37 means you don’t need to swap out rims or wheels to try new things. - Built with standard high-quality components including J-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Santa Cruz Reserve wheels are built on the highest quality carbon rims. Confidence in the design and strength of the Reserve wheels is backed up by a lifetime warranty. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from Santa Cruz's experience of knowing what riders need at every level—from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Reserve 37 wheels offer the widest range of choices. The 37s are optimized for tires from 2.5 to 2.8 inches wide, and will still support a 3.0 nicely. Plus-curious, but not willing to commit to an ultra-wide rim that’ll square off the swathe of 2.6 tires popping out of molds around the world? The new Reserve 37s width (37mm internal) is optimized for tires from 2.5 to 2.8 inches wide, and will still support a 3.0 nicely. The Reserve 37 means you don’t need to swap out rims or wheels to try new things. - Built with standard high-quality components including J-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Featuring the new generation Ratchet System hubs that are lighter and faster than ever before, along with bladed spokes and the superb wheel build quality and reliability you expect from DT Swiss, the XRC 1200 SPLINE 25 is a race-bred trail machine that loves to go fast. It accelerates like nothing else, tracks like nothing else, and is reliable like nothing else. It is the benchmark for high speeds on any trail, on any gravel road, and in any race — whether that race takes place between the tape or in your head. - SRAM XD MTB cassette-compatible

When you pair the latest ultra-light DT Swiss Ratchet System hubs with an XC-tuned 30mm internal-width carbon rim, you get a precision tool for XC domination. Its 28 bladed, high-end DT Swiss spokes and master wheel builder quality make the XRC 1200 SPLINE 30 extremely capable over gnarly roots and rocks, up climbs and down descents, all while more than light enough to gain an edge attacking out of tight switchbacks. - SRAM XD MTB cassette-compatible

Santa Cruz Reserve wheels are built on the highest quality carbon rims. Confidence in the design and strength of the Reserve wheels is backed up by a lifetime warranty. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from Santa Cruz's experience of knowing what riders need at every level—from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Reserve 37 wheels offer the widest range of choices. The 37s are optimized for tires from 2.5 to 2.8 inches wide, and will still support a 3.0 nicely. Plus-curious, but not willing to commit to an ultra-wide rim that’ll square off the swathe of 2.6 tires popping out of molds around the world? The new Reserve 37s width (37mm internal) is optimized for tires from 2.5 to 2.8 inches wide, and will still support a 3.0 nicely. The Reserve 37 means you don’t need to swap out rims or wheels to try new things. - Built with standard high-quality components including J-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 30 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs.

Made for modern XC tracks—240 hub + 30 mm carbon rim = super-fast! Tailored to the needs of performance-oriented cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. The light, 30mm-wide carbon rims offer ideal support for modern XC tires. Rolling on race-proven and super-durable 240 hubs with RATCHET EXP freehub system, every bit of your energy is transferred into forward motion via equally racy double-butted spokes and a perfect wheel build.

Our all-rounder. A 240 hub combined with a carbon rim results in a durable and versatile package. The low weight of the carbon rim, specially designed for all-mountain use, combined with the latest evolution of the 240 hub with RATCHET EXP freewheel, make the XMC 1501 SPLINE ONE wheels the perfect partner in crime for all kinds of mountain adventures. The 30mm inner width of the tubeless-optimized carbon rim provides excellent support for the wide tubeless tire. Double-butted competition race spokes and the highest quality wheel construction round off our XMC 1501 SPLINE ONE wheels.

- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth-rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release

The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Precise Handling At Full Speed. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for XC riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim

The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)

Precise Handling At Full Speed. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for XC riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.