Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
- Specific DT-Swiss tubeless ready valve stems for tubeless applications
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum
$6.99 - $9.99
- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size
The 45NRTH stud tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. Aluminum carbide studs sold separately. - POM-injected handle - Stainless steel barrel - Thumb and index-finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!
- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air
Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.
Previous page Page 2 of 2