FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5° - Lever Compatability: Mountain 22.2mm - Rise: 32mm
Velo Orange's take on multi-hand-position handlebars, The Crazy Bar: half cruiser bar, half bull horns. Intended for touring, with multiple hand positions allowing the rider to move their hands around the bar during long stretches in the saddle. The main grip area is 22.2mm and fits mountain bike grips, flat bar brake levers and shifters. The bull horns are 23.8mm and fit bar end shifters or reverse brake levers. 25.4mm clamp area. Bull horns are 23.8mm so road levers/bar end shifters fit. Main bar is 22.2mm so MTB grips, levers and shifters fit. - Weight: 860g - Backsweep: 45° - Lever Compatability: Mountain 22.2mm and Road 23.8mm
- Shallow drop aluminum urban pursuit/track bar - 260g: all Nitto bars are measured center to center - 38cm width - 26mm clamp - 28mm drop
- Extra wide 6061 aluminum with tons of sweep - Forward offset to negate the sweep's stem shortening effect - Sweep: 15 degrees
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
$49.90 - $53.90
- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm
- Shot-peened tange aluminum that makes for a great narrowish touring/townie bar - Compatible with MTB grips and shifters - Can be used flipped as a riser bar or down for a less upright position
- Perfect townie bike bar or think of it as an inverted moustache bar - Rigid aluminum construction, compatible with MTB-style levers
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 372g - Lever Compatability: Mountain 22.2mm
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Made in the USA - Chrome finish - Weight: 526g - Lever Compatability: Mountain 22.2mm
Page 1 of 1